Horizontal Toggle Clamp Straight Base All Arm Types
Straight Base Horizontal Toggle Clamps with All Arm Types
GOOD HAND straight base horizontal toggle clamps are simpler to mount than flat base models: they need only one upright mounting face and two mounting holes, set in line with the handle. That makes them a good fit where mounting space is tight, where the fixture must leave more room for the workpiece, or where several clamps have to be fitted at different heights, for example along an edge rail or on fixture plates with holes in a straight line.
The category lists 27 steel models covering a range of arm and spindle types, with holding capacities from 22.7 kg to 500 kg. Because the base style is fixed, selection comes down to the contact geometry, spindle adjustment range and holding capacity, and to whether the base holes match the fixture plate.
How to Select a Straight Base Horizontal Toggle Clamp
| Selection Factor | What to Check |
| Holding capacity (kg) | The maximum external force the locked clamp can resist during processing; 22.7 kg to 500 kg in this category |
| Arm / spindle type | Contact geometry, opening angle and spindle adjustment travel |
| Body material | Steel only; for stainless steel see the Stainless Steel Horizontal Toggle Clamps category |
| Hole alignment | The base holes sit in line with the handle and must match the hole pattern on the fixture plate |
| Handle clearance | Space needed for the handle in both the open and locked positions |
| Safety lock | Whether the operation needs extra protection against accidental release |
Straight Base Model Specifications
| Model | Holding Capacity (kg) | Bar Opens (°) | Handle Opens (°) | Weight (kg) |
| GH-22010 | 22.7 | 90 | 69 | 0.03 |
| GH-22030 | 22.7 | 90 | 69 | 0.03 |
| GH-201-AI | 27 | 90 | 75 | 0.03 |
| GH-201-I | 27 | 90 | 75 | 0.03 |
| GH-21800 | 30 | 92 | 109 | 0.04 |
| GH-22105 | 68 | 83 | 70 | 0.11 |
| GH-22115 | 68 | 83 | 70 | 0.11 |
| GH-20751-B | 75 | 96 | 78 | 0.09 |
| GH-201-BI | 90 | 85 | 73 | 0.13 |
| GH-201-BSI | 90 | 85 | 73 | 0.13 |
| GH-21501-B | 150 | 93 | 76 | 0.25 |
| GH-225-DI | 227 | 90 | 65 | 0.26 |
| GH-22170 | 250 | 93 | 88 | 0.28 |
| GH-22180 | 250 | 93 | 88 | 0.3 |
| GH-22190 | 250 | 93 | 88 | 0.33 |
| GH-22200 | 250 | 93 | 88 | 0.36 |
| GH-22382 | 250 | 77 | 85 | 0.22 |
| GH-22501-A | 250 | 90 | 72 | 0.47 |
| GH-22501-B | 250 | 90 | 72 | 0.44 |
| GH-22240 | 273 | 90 | 84 | 0.63 |
| GH-22250 | 273 | 90 | 84 | 0.63 |
| GH-26382 | 280 | 79 | 87 | 0.46 |
| GH-20236 | 340 | 90 | 68 | 0.61 |
| GH-23501-A | 350 | 90 | 72 | 0.96 |
| GH-23501-B | 350 | 90 | 72 | 0.96 |
| GH-24501-B | 450 | 94 | 85 | 1.45 |
| GH-22384 | 500 | 66 | 83 | 0.74 |
Confirm dimensions, mounting-hole pattern and holding capacity on each model page before ordering.
Typical Applications
Straight base horizontal toggle clamps are used where clamps are mounted in line or at different heights on a fixture:
- Welding fixtures with in-line mounting holes
- Machining and CNC fixture plates
- Assembly and sub-assembly jigs
- Inspection and testing jigs
- Woodworking jigs and templates
- Production line fixtures and pallets
- Custom industrial fixtures
Related Horizontal Toggle Clamp Categories
- Horizontal Toggle Clamp Flat Base All Arm Types
- Stainless Steel Horizontal Toggle Clamps
- Horizontal Toggle Clamp Side Mounting Type
- Horizontal Toggle Clamp Narrow Base
- Horizontal Toggle Clamps With Safety Lock
- Horizontal Hold Down Clamps
Frequently Asked Questions About Straight Base Horizontal Toggle Clamps
What does "straight base" mean? It means the base mounting holes sit in a straight line with the handle rather than being offset to the side. The clamp needs only one upright face and two mounting holes, which suits fixtures where the mounting face has to stay on the same axis as the handle, such as edge rails or fixture plates with holes in a straight line.
How many models are available? The category currently lists 27 models with different arm and spindle types. Because the base style is fixed, focus on whether the contact geometry and holding capacity suit the workpiece rather than on the base itself.
How do I choose the right holding capacity? Choose by the reaction forces the process puts on the part, such as cutting force, drilling thrust or welding distortion, and allow a margin. Models in this category range from 22.7 kg (GH-22010) to 500 kg (GH-22384).
Are stainless steel straight base models available? No. All straight base models are steel. If the clamp will be exposed to moisture, coolant or washdown cleaning, see the Stainless Steel Horizontal Toggle Clamps category, which currently lists flat base models, or contact GOOD HAND to ask about availability.
What is the difference between straight base and narrow base models? Both have bases in line with the handle. Narrow base models have a narrower mounting footprint for fixture plates with limited mounting width. If the fixture plate cannot fit a standard straight base, look at the narrow base models.


